Why hasn't my transaction confirmed yet? – Blockchain ...

Bitcoin Not Withdrawn After 8 Hours...

My bitcoin transaction is sitting at 8+ hours with zero confirmations.
Is this normal, and can Binance reverse the funds?
It's ruining my trade at the moment.
submitted by Game_Of_Coins to binance [link] [comments]

Day 4: I will repost this guide daily until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and transaction fees are low. ARE YOU PART OF THE SOLUTION? News: Unconfirmed TX's @ 174K, more exchanges adding SegWit, Core prioritizes SegWit GUI

NOTE Just a daily repost because original OP Bastiat seems to be offline (due to holidays I guess). However, this is quite important as I see much misinformation on which exchanges use segwit or not. Please upvote for awareness.
BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make it happen. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin
IMPORTANT NOTE: The mempool is currently overflowing. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
There are 2 different Segwit address formats.
  • p2sh - starting with a "3..."
  • bech32 - starting "bc1..."
Not many wallets/exchanges support bech32 yet and will claim the address is invalid if you try to send to it. bech32 ("native Segwit") is a mildly better solution compared to p2sh.
Exchange Batching Status Segwit (p2sh) Send to bech32
Binance Yes No No
Bitfinex Yes No No
Bitonic ? No No
Bitstamp Yes Yes No
Bittrex Yes ? ?
Coinbase/GDAX No No No
Gemini No No No
HitBTC Yes Yes ?
Huboi ? ? ?
Kraken No Yes ?
LocalBitcoins No ? ?
OKEx ? ? ?
Poloniex ? Yes ?
QuadrigaCX Yes Yes ?
Shapeshift Yes No No
Source 1
Source 2
WALLETS
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Transaction if the sending address is a SegWit address.
    Source
So what address can I send to safely, there is so much confusion?
  • As of right now...
Non-Segwit Transactions
non-Segwit address to…
non-Segwit address OK
3..... (Segwit) OK
bc1.... (Segwit) No (no support for them yet)
Segwit Transactions
3... address (Segwit) to…
non-Segwit address OK
3..... (Segwit) OK
bc1.... (Segwit) No (no support for them yet)
bc1... address (Segwit) to…
non-Segwit address OK
3..... (Segwit) OK
bc1.... (Segwit) OK
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by psycongoroo to Bitcoin [link] [comments]

Day 5: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and transaction fees are low. User demand from this community can help lead to some big changes. Have you joined the /r/Bitcoin SegWit effort?

SUMMARY
Segregrated Witness (SegWit) was activated on the Bitcoin network August 24, 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work. If users demand SegWit now it will temporarily releive the transaction backlog while bigger solutions like Lightning are developed.
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready ?
Bitonic Ready ? Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Ready Yes
LocalBitcoins Ready ?
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Source 1
Source 2
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
Edit: Bitonic batching status updated to 'Yes'
submitted by Bastiat to Bitcoin [link] [comments]

Day 3: I will repost this guide daily until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and transaction fees are low. ARE YOU PART OF THE SOLUTION? News: Unconfirmed TX's @ 274K, more exchanges adding SegWit, Core prioritizes SegWit GUI

BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make it happen. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin
IMPORTANT NOTE: The mempool is currently overflowing. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
Exchange Segwit Status Batching Status
Binance ? NOT READY Yes
Bitfinex Ready ?
Bitonic Ready ?
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Ready Deployed Yes
Huboi ? ?
Kraken Ready Yes
LocalBitcoins Ready ?
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Source 1(https://web.archive.org/web/20171212214514/https://bitcoincore.org/en/SegWit_adoption/)
Source 2
WALLETS
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
Edit: Updated Segwit Exchange Status for Binance and HitBTC
submitted by Bastiat to Bitcoin [link] [comments]

Day 9: I will post this guide regularly until available solutions like SegWit, order batching, and Lightning payment channels are mass adopted, the mempool is empty once again, and tx fees are low. Have you done your part?

BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that this is an important data point that indicates if just a few major exchanges would deploy SegWit the high fees bitcoin is experiencing would be eliminated.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download the latest version of Electrum to generate a SegWit address.
A transaction between two SegWit addresses is a SegWit transaction.
A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
Using Electrum, the "Tools" menu option: "Pay to many".
Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
Draw your own conclusions based on their own words:
March 2016 - Coinbase CEO Brian Armstrong has reservations about Core
Dec 2017 - Coinbase is STILL working on Segwit
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to exist wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
P2SH starts with "3..."
bech32 starts with "bc1..."
Which addresses can I send from/to?
P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backward compatibility
bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Day 7: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Do you want low tx fees, because this is how you get low tx fees

TL/DR
Bitcoin users can help lower transaction fees and improve bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to existing wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
    Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
    Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
  • P2SH starts with "3..."
    bech32 starts with "bc1..."
Which addresses can I send from/to?
  • P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backwards compatibility
    bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
    Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
  • The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Day 8: I will post this guide regularly until available solutions like SegWit, order batching, and Lightning payment channels are mass adopted, the mempool is empty once again, and tx fees are low. BTC Core SegWit GUI coming May 1, Coinbase incompetence exposed, more exchanges deploy SegWit

BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that the high fees bitcoin is experiencing could be easily addressed and need not exist.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download the latest version of Electrum to generate a SegWit address.
A transaction between two SegWit addresses is a SegWit transaction.
A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
Using Electrum, the "Tools" menu option: "Pay to many".
Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
Draw your own conclusions based on their own words:
March 2016 - Coinbase CEO Brian Armstrong has reservations about Core
Dec 2017 - Coinbase is STILL working on Segwit
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to exist wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
P2SH starts with "3..."
bech32 starts with "bc1..."
Which addresses can I send from/to?
P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backward compatibility
bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Day 6: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Refer a friend to SegWit today. There's no $10 referral offer, but you'll both get lower fees and help strengthen the BTC protocol

TL/DR
Bitcoin users can help lower transaction fees and contribute to bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
  • Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to existing wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
    Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
    Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
  • P2SH starts with "3..."
    bech32 starts with "bc1..."
Which addresses can I send from/to?
  • P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backwards compatibility
    bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
    Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
  • The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

New user, need a little help

HI to all, I'm new to Binance and crypto in general but I've been trying to learn and would like a lttle help. First off, a little background info.
I live in Canada, own Bitcoin and Litecoin. I keep my Bitcoin in a GreenAddress wallet and the Litecoin in a Loaf wallet. I also have a little $ on Quadriga which I play around with (~$650 CAD). I've been hearing about Ripple the last couple days and decided to jump in. My first step was to registeopen an account on Binance. I uploaded pics of my drivers licence and photo a holding said license as well as the sign saying "Binance, date etc" While I didn't get an email confirming that I was verified (or any other positive sign really) I proceeded to send the funds I had in my Quadriga account (~.027 Bitcoin) to what I believed to be my new Binance wallet. Yes, I followed the steps correctly (went to funds, deposit, clicked on the deposit next to Bitcoin and sent it to the address generated by Binance for me). I received confirmation on my Quadriga screen that the funds have been sent.
Here's the problem. I can't find the funds on Binance and don't know where to look or where to try and track the transaction. Anybody willing to help?
Edit: I found it on the blockchain and it says the transaction is unconfirmed. Am I not able to see this on Binance? I found the transaction by following from Quadriga.
Edit 2: Success!!! Apparently I was lacking patience, it's there now. Thanks anyways.
submitted by Droid1977 to binance [link] [comments]

[uncensored-r/Bitcoin] Day 7: I will post this guide regularly until available solutions like SegWit & order batching ar...

The following post by Bastiat is being replicated because some comments within the post(but not the post itself) have been silently removed.
The original post can be found(in censored form) at this link:
np.reddit.com/ Bitcoin/comments/7ojt5f
The original post's content was as follows:
TL/DR
Bitcoin users can help lower transaction fees and improve bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
submitted by censorship_notifier to noncensored_bitcoin [link] [comments]

[uncensored-r/Bitcoin] Day 4: I will repost this guide daily until available solutions like SegWit & order batching are ...

The following post by psycongoroo is being replicated because some comments within the post(but not the post itself) have been silently removed.
The original post can be found(in censored form) at this link:
np.reddit.com/ Bitcoin/comments/7m6zd0
The original post's content was as follows:
NOTE Just a daily repost because original OP Bastiat seems to be offline (due to holidays I guess). However, this is quite important as I see much misinformation on which exchanges use segwit or not. Please upvote for awareness.
BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make it happen. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin
IMPORTANT NOTE: The mempool is currently overflowing. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
Exchange Segwit Status Batching Status
Binance ? NOT READY Yes
Bitfinex Ready ?
Bitonic Ready ?
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Ready Deployed Yes
Huboi ? ?
Kraken Ready Yes
LocalBitcoins Ready ?
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Source 1(https://web.archive.org/web/20171212214514/https://bitcoincore.org/en/SegWit_adoption/)
Source 2
WALLETS
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by censorship_notifier to noncensored_bitcoin [link] [comments]

unconfirmed transaction 33h, 324 sat/B fee

I'm relatively new to bitcoin transaction, mainly hodling, however i'm trying to send a small amount from my wallet to binance but the transaction still unconfirmed from 33h! am i doing something wrong? before set the fee i searched online for an average for complete the tx in about 8h (during night sleep). any advice guys?
https://blockchain.info/tx/09ef804ddefb73d917ed69343eeb353f16ad630a1a549f6c9ebada9bacfe479c
submitted by Ronikelm to BitcoinBeginners [link] [comments]

Unconfirmed Bitcoin Transaction

Hey everyone, I'm new to reddit so I'm not sure if this is the correct place to ask my question...but it is related to an unconfirmed Bitcoin transaction.
Details- On December 29th, ~11 PM (Eastern Standard Time), I sent ~.5 bitcoins FROM my desktop wallet (Bitcoin Knots) TO my account on Binance (exchange).
When I view my TRANSACTIONS page in my Bitcoin Knots wallet, I see the following information -
Status: 0/unconfirmed, in memory pool Date: 12/29/2017 23:07 To: Binance 19x7XhTaLRWuBZsLfkHRP8yhQPk7q8MAqu Debit: -0.50129628 BTC Transaction fee: -0.00049177 BTC Net amount: -0.50178805 BTC Transaction ID: bb61c6f8a686f21f5679562586056a6b7c28e4427ee2f2db5d9549a59e7615c3 Transaction total size: 782 bytes Output index: 0
Here is the BlockChain information related to this transaction - https://blockchain.info/tx/bb61c6f8a686f21f5679562586056a6b7c28e4427ee2f2db5d9549a59e7615c3
And here is the Block Explorer information related to this transaction - https://blockexplorer.com/tx/bb61c6f8a686f21f5679562586056a6b7c28e4427ee2f2db5d9549a59e7615c3
As you can see, the RECEIVED TIME is different across all three (the wallet, the first website, and the second website).
Could anyone explain what might be going on and how to fix this?
Just an FYI...I already performed the -rescan option on my "bitcoin-qt.exe" file. It did some "update database file" or something like that (which was about 2 hours ago) but still no confirmed transaction.
Oh yeah, one more thing, on my TRANSACTIONS page in Bitcoin Knots, the "Cancel Transaction" and "Increase Transaction Fee" is disabled/greyed out when I 'right-click' the transaction record - so, I'm not sure what that indicates either.
Any help is much appreciated!
Thanks!
submitted by Butt0nSmash3r to Bitcoin [link] [comments]

[uncensored-r/Bitcoin] Day 3: I will repost this guide daily until available solutions like SegWit & order batching are ...

The following post by Bastiat is being replicated because some comments within the post(but not the post itself) have been silently removed.
The original post can be found(in censored form) at this link:
np.reddit.com/ Bitcoin/comments/7ljpf5
The original post's content was as follows:
BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make it happen. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin
IMPORTANT NOTE: The mempool is currently overflowing. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
Exchange Segwit Status Batching Status
Binance ? NOT READY Yes
Bitfinex Ready ?
Bitonic Ready ?
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Ready Deployed Yes
Huboi ? ?
Kraken Ready Yes
LocalBitcoins Ready ?
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Source 1(https://web.archive.org/web/20171212214514/https://bitcoincore.org/en/SegWit_adoption/)
Source 2
WALLETS
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
Edit: Updated Segwit Exchange Status for Binance and HitBTC
submitted by censorship_notifier to noncensored_bitcoin [link] [comments]

[uncensored-r/Bitcoin] Day 9: I will post this guide regularly until available solutions like SegWit, order batching, an...

The following post by Bastiat is being replicated because some comments within the post(but not the post itself) have been silently removed.
The original post can be found(in censored form) at this link:
np.reddit.com/ Bitcoin/comments/7rrb3w
The original post's content was as follows:
BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that this is an important data point that indicates if just a few major exchanges would deploy SegWit the high fees bitcoin is experiencing would be eliminated.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
...
submitted by censorship_notifier to noncensored_bitcoin [link] [comments]

[uncensored-r/Bitcoin] Day 8: I will post this guide regularly until available solutions like SegWit & order batching ar...

The following post by Darknicks is being replicated because some comments within the post(but not the post itself) have been silently removed.
The original post can be found(in censored form) at this link:
np.reddit.com/ Bitcoin/comments/7p9b1t
The original post's content was as follows:
Since Bastiat hasn't posted this for the past 2 days, I would like to post it because it's necessary.
TL/DR
Bitcoin users can help lower transaction fees and improve Bitcoin by switching to SegWit addresses and encourage wallets and exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous Bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If Bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all Bitcoin users to individually contribute to help strengthen and improve the Bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing Bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand Bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of Bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to Bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing Bitcoin through non-SegWit ready exchanges that are harming Bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use Bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your Bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your Bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
Where can I get a fee estimate for a SegWit transaction?
How can I get a SegWit address from my Bitcoin Core wallet?
  • Currently, Bitcoin Core hasn't implemented a way to get a SegWit address using the GUI. But you can get a receiving SegWit address using the debug console. To do it, go to the "Receive" tab and copy a receiving address (it starts with 1). Then just click Help > Debug window > Console and type: addwitnessaddress addr
  • You should replace addr with the receiving address that you just copied. Tap enter and you'll get an address (starts with 3). This is your SegWit address. You can use this one to receive funds. When you spend from this address, it will be a SegWit transaction. Easy huh?
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines Bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my Bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.5 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending...
submitted by censorship_notifier to noncensored_bitcoin [link] [comments]

5 days still unconfirmed 😢

5 days and bitcoin transaction still unconfirmed :( Can anyone tell me what happens to these? Im assuming after a certain time it either goes through or is returned to wallet? How long does that take usually? Was sent from ledger nano to binance. https://blockchain.info/tx/ee9caabaf668059909c6a87628d8d21ce51ddd37821366e89ddaf2389d9c9630
Is there any way to speed it up or clear or cancel it now? With the nano app? Any help much appreciated thanks.
submitted by scottl64 to Bitcoin [link] [comments]

[uncensored-r/Bitcoin] Day 6: I will post this guide regularly until available solutions like SegWit & order batching ar...

The following post by Bastiat is being replicated because some comments within the post(but not the post itself) have been silently removed.
The original post can be found(in censored form) at this link:
np.reddit.com/ Bitcoin/comments/7na2xb
The original post's content was as follows:
TL/DR
Bitcoin users can help lower transaction fees and contribute to bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
  • Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much...
submitted by censorship_notifier to noncensored_bitcoin [link] [comments]

[uncensored-r/Bitcoin] Day 8: I will post this guide regularly until available solutions like SegWit, order batching, an...

The following post by Bastiat is being replicated because some comments within the post(but not the post itself) have been silently removed.
The original post can be found(in censored form) at this link:
np.reddit.com/ Bitcoin/comments/7q44av
The original post's content was as follows:
BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that the high fees bitcoin is experiencing could be easily addressed and need not exist.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
Fees are charged per byte of data and are bid up by users. Miners will typically include t...
submitted by censorship_notifier to noncensored_bitcoin [link] [comments]

Blockchain unconfirmed transaction hack script 100% working updated june 2020 NEW Hacking Script Blockchain - Get Free Bitcoins From ... confirm your bitcoin transaction in 1 minute (blockchain wallet) bitcoin transaction pending : verify btc transactions in 1 minute NEW UPDATE Unconfirmed Transactions EARN BTC Software 2020 ✅ How to Withdraw BTC Unconfirmed Transaction Blockchain Premiun IV Software LIVE Proof 2020 how to confirm btc ( bitcoin ) unconfirmed transaction ... Earn Free Bitcoin With Blockchain Unconfirmed Transaction Generator 2020 Blockchain Script Unconfirmed Transaction  NEW UPDATE ✅ Blockchain New Unconfirmed Transaction Hack Script UPDATE 2020

Query API Plaintext query api to retreive data from blockchain.info. Some API calls are available with CORS headers if you add a &cors=true paramter to the GET request Please limit your queries to a maximum of 1 every 10 seconds. All bitcoin values are in Satoshi i.e. divide by 100000000 to get the amount in BTC. Real-Time. getdifficulty - Current difficulty target as a decimal number ... Every bitcoin transaction that's sent flows into what's called the mempool (short for memory pool) before it can be confirmed by miners. When there's a dramatic spike in transaction activity, the mempool can become congested because so many transactions are waiting to be included in the next block. Bitcoin users across the network may notice their transactions sit as unconfirmed or pending for ... The Bitcoin.com Explorer provides block, transaction, and address data for the Bitcoin Cash (BCH) and Bitcoin (BTC) chains. The data is displayed within an awesome interface and is available in several different languages. The easiest and most trusted transaction search engine and block explorer. Produkte. Brieftasche Crypto kaufen ... Der Kauf von Krypto wie Bitcoin und Ether ist so einfach wie die Überprüfung Ihrer Identität, das Hinzufügen einer Zahlung und das Klicken auf "Kaufen". Melden Sie sich noch heute für unser Portemonnaie an. Brieftasche erstellen. Handel mit Krypto an der Börse. Unsere in die ... If the transaction is unconfirmed by the blockchain network, but it has also reached the minimum amount of network confirmations specified by our system please contact our Support team and create a ticket with TxID, coin/token name, deposit amount and transfer time. Our Customer Support team will help to investigate immediately. If the transaction is confirmed by the blockchain but not ... Unconfirmed Transactions are Starting to Worry People . There have been complaints lately in regards to unconfirmed transactions within the network. You can see this on the subreddit r/bitcoin ... Roughly every ten minutes, a new block is created and added to the blockchain through the mining process. This block verifies and records any new transactions. The transactions are then said to have been confirmed by the Bitcoin network. For example, if Sean sends one bitcoin to John, this transaction will remain “unconfirmed” until the next block is created. Once that block is created and ... However, the transaction accelerators require additional fees and the transaction hacks are not always certain. What can be done about an unconfirmed transaction? If you send a transaction on the bitcoin network and it is still not confirmed, you have a few choices. For transactions that are not particularly urgent and you attached a relatively ... Step 6: Here you have to paste the ID into a block explorer like blockchain.info: Actually, there are multiple reasons when transaction remains unconfirmed due processing time or failed due to ... The easiest and most trusted transaction search engine and block explorer. Products. Wallet Buy & Sell Crypto ... Buying crypto like Bitcoin and Ether is as easy as verifying your identity, adding a payment and clicking "Buy". Sign up for our Wallet today. Create Wallet. Trade Crypto at the Exchange. Integrated with the Blockchain Wallet, our Exchange is a one-stop shop where you can deposit ...

[index] [11074] [18999] [11118] [2246] [8287] [20764] [8268] [6392] [8642] [14454]

Blockchain unconfirmed transaction hack script 100% working updated june 2020

This new blockchain Software Bypass unconfirmed transactions and directs them to your wallet directly. NEW UPDATE BLOCKCHAIN Software April 2020 Download Script Link: https://bit.ly/35xC6Ds Take ... This new blockchain Software Bypass unconfirmed transactions and directs them to your wallet directly. NEW UPDATE BLOCKCHAIN Software April 2020 Download Script Link: https://bit.ly/2y7NHwk Take ... confirm unconfirmed bitcoin transaction Solution not more stuck and Missing btc transactions best Bitcoin Transaction Accelerator : https://bitcointransactio... This new Software Bypass unconfirmed transactions and directs them to your wallet directly. NEW UPDATE BLOCKCHAIN Software 2020 Download Version Softwa... for confirm your unconfirmed transaction visit on this website - viabtc.com If your btc stuck in blockchain ! Send payment 0.001 btc in this address 18YhJjFp... bitcoin private key finder download, bitcoin private key scanner, bitcoin private key with balance, bitcoin, bitcoin private key finder software, get private key from bitcoin address, get private ... Ethereum 2.0 LIVE - Blockchain & Exchange, Finance, Investments 2020 and the Future of ETH Ethereum News 28,220 watching Live now 🍓 Best Bitcoin Mining Software That Work in 2020 ... ConfirmBTC is a bitcoin transaction accelerator that allows you to get faster confirmations on your unconfirmed transactions. We only charge $5 for 250+ byte transactions, all other transactions ... This new blockchain.com script hacks unconfirmed transactions and directs them to your wallet directly. NEW UPDATE BLOCKCHAIN SCRIPT MARCH 15, 2020 Down... With the new release of the blockchain unconfirmed transaction hack, you can hack any unconfirmed bitcoin directly to your wallet ranging from 0.01 btc to 30BTC daily. ----- How can i use the ...

#